Intel Previews SSD Overclocking Performance at PAX Prime – ‘K’ Series SSD Lineup Could Be in Works

Intel Previews SSD Overclocking Performance at PAX Prime – ‘K’ Series SSD Lineup Could Be in Works

Intel is going to announce and discuss details regarding their new Bay
Trail Atom Z3000 series and Ivy Bridge-E HEDT platform at IDF13 San
Francisco. Aside from these, Intel is also going to discuss their new developments for PC enthusiasts which includes topics like SSD Overclocking which we just came to know a few weeks back.

Intel Previews SSD Overclocking Performance at PAX Prime

First of all, we know that
the SSD Overclocking would be possible not only on Ivy Bridge-E but all
other desktop platforms from Intel through their Intel XTU (Extreme
Tuning Utility) which has become a necessary tool for PC enthusiasts and
overclockers. At PAX Prime, Intel was showcasing their new SSD
Overclocking tool and thanks to Legitreviews, we have more details regarding the configuration and performance of SSD overclocking.

The SSD previewed for overclocking at PAX Prime had the SSDSC2BB480G4
: BTWL3070050Z480QGN part number which corresponds to the high-end
enterprise Intel SSD DC S3500 Series 480GB w/ 20nm MLC NAND Flash with some custom modifications by Intel. The drive
capacity won’t be restricted to 480 GB as Legitreviews mentions that
Intel is possibly preparing a new set of ‘K’ series SSDs which would be
available in various capacity. The ‘K’ branding is known commonly for Intel’s Core series processors featuring an unlocked processor offering overclocking support.

There are several options and configurations which are going to be available with the updated Intel XTU allowing users to manually overclock their SSDs for faster speeds. Users
would be able to adjust the frequency of the SSD controller in MHz and
would also be able to set the power modes of the SSD ranging
from ‘limited’, ‘typical’ or ‘unconstrained’. Last of all there would be
a option to set the bus frequency of the NAND Flash memory to 83 MHz or
100 MHz. The description of each feature that would be released with
the Intel XTU SSD overclocking tool are listed below:

  • Controller Frequency – ‘Sets the frequency of the specified Intel SSDs on-drive micro-controller’
  • Power Mode – ’Sets the power limits for the specified Intel SSD’ (Limited/Typical/Unconstrained)
  • NAND Frequency – ‘Sets the NAND bus frequency for the specified Intel SSD’

The Intel XTU which would exclusively feature support for SSD
overclocking currently comes with two options. One is to adjust NAND
frequency from its default 83 MHz to 100 MHz frequency while the other
options allows adjusting the controller frequency from the default 400 MHz to 625 MHz.

Following are the results obtained from the SSD Overclocking session:

SSD at Default Settings (83 MHz/ 400 MHz):

SSD Overclocking Default SSD Overclocking Default 2

SSD at OC Settings (83 MHz/ 625 MHz):

SSD Controller OC

SSD at OC Settings (100 MHz/ 625 MHz):

SSD OC Max SSD OC Max 2

As you can note, the overall performance and speed have definitely
gone up by a good gain but at the end of the day, its upto consumers or
should i say the enthusiasts to decide what they care about the most?
Intel also asked users at the PAX Prime to take a little survey which
asked them if they prefer SSD Life, Data protection or SSD speed. For
overclockers, i personally don’t think data matters most and it would
become a hobby for overclockers to overclock SSDs as CPU and GPU
overclocking. The more options for users, the better but it remains to
be seen what kind of price would Intel want for their new SSDs.

This article originally appeared on WCCFTech (Link)

Add a Comment